ReliOn Confirm User Instruction Manual page 53

Step 3:
Mix control solution by gently
inverting bottle. Remove the cap from the
control solution bottle. While the Apply Blood
symbol is flashing, place a drop of the
control solution on the end of the test strip.
DO NOT put control solution on top of
the test strip.
solution and the meter will beep. The meter
will begin to count down.
Step 4:
In 7 seconds the meter will beep
again and display the control solution result.
Compare the result to the range printed
on the test strip bottle.
is within the acceptable range. If the result
falls within this range, the meter and test strip
are working correctly.
The test strip will draw up the
Make sure the result
53