ReliOn Confirm User Instruction Manual page 51

Step 1:
Insert a test strip as shown in diagram.
Test strip should seat
firmly into meter. The meter will turn on automatically. The full screen will
come on for a moment. Make sure all symbols appear on the screen (see
page 8). The last result will then appear. Then the code number (F-2, F-3,
or F-4) will appear for three seconds followed by the Apply Blood symbol.
Make sure that the code number on the screen matches the code number
on the test strip bottle. If screen code does not match the test strip code,
use a new test strip. If code still does not match, use a new bottle of test
strips or call Customer Service at 855.776.0662.
51