Regional Settings; Trip Monitor Settings - Audiovox NAV 104 User Manual

5.3.8 Regional settings

These settings allow you to customise the application for your local language,
measurement units, time and date settings and formats, as well as to choose the time
zone.
Button

5.3.9 Trip monitor settings

Trip logs contain useful information about your trips. Trip logs can be saved manually
when you reach your destination or you can turn on the automatic saving here. You can
access these logs in the Trip monitor. Trip monitor is available from the More menu.
This button displays the current written language of the user interface.
By tapping the button, you can select a new language from the list
of available languages. The application will restart if you change this
setting; you are asked to confirm this.
You can set the distance units to be used by the program. Audiovox NAV
104 may not support all the listed units in some voice guidance languages.
Select between 12 and 24 hours time display and the various international
date display formats.
You can also set other country specific units used to display different
values in the application.
By default, time zone is taken from the map information and adjusted by
your current location. Here you can set time zone and daylight saving
manually.
Trip monitor can record statistical data of your trips. If you need these logs
later, you can let the application save them automatically for you.
This is not a button. This line shows the current size of the trip database,
the sum of all trip and track logs saved.
Track logs, the sequence of the positions given by the GPS receiver, can
be saved together with trip logs. They can later be displayed on the map.
You can let the application save the track log whenever it saves a trip.
GB
Description
234