Changing The Road Types Used In Route Planning - Audiovox NAV 104 User Manual

3.4.9 Changing the road types used in route planning

To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings (page 224).
1.
On the Map screen, tap
2.
Tap any of the listed road types to modify the route. If needed, scroll the list
for all road types. You have the following options (their order depends on the
selected vehicle type):
•
are driving a slow car or you are towing another vehicle.
•
purchase a pass or vignette to use the road for a longer period of time.
They can be enabled or disabled separately from toll roads.
•
roads where there is a per-use charge) in the routes by default. If you
disable toll roads, Audiovox NAV 104 plans the best toll-free route.
•
planned route by default. However, a map does not necessarily contain
information about the accessibility of temporary ferries. You might also
need to pay a fare on ferries.
•
by default: unpaved roads can be in a bad condition and usually you
cannot reach the speed limit on them.
GB
and then tap
- You might need to avoid motorways when you
- Charge roads are pay roads where you can
- Audiovox NAV 104 includes toll roads (pay
- Audiovox NAV 104 includes ferries in a
- Audiovox NAV 104 excludes unpaved roads
200
.