Elements Of The Active Route; Manipulating The Map - Audiovox NAV 104 User Manual

2.3.3.7 Elements of the active route

Audiovox NAV 104 shows the
Symbol
Current GPS position
and Start point
Waypoint (intermediate
destination)
Destination (end point)
Route colour
Streets and roads that
are excluded from the
navigation

2.3.4 Manipulating the map

Tap the map anywhere to browse it during navigation. The map stops following the
current position (the Vehimarker, a blue arrow by default, is not locked in a fix position
on the screen any more) and control buttons appear to help you modify the map view.
route
in the following way:
Name
Your current position displayed on the map.
Normally if GPS position is available, the route starts
from the current position. If there is no valid GPS
position, Audiovox NAV 104 uses the last known
position as the start point.
An intermediate destination of the route before
reaching the final destination.
The final destination of the route.
The route always stands out with its colour on the
map, both in daytime and in night colour mode.
You can choose whether you want to use or avoid
certain road types (page 224). However, when
Audiovox NAV 104 cannot avoid such roads, the
route will include them and it will show them in a
colour that is different from the route colour.
GB
Description
•
In pedestrian mode it is the exact GPS
position.
•
If a vehicle is selected for route calculation
and roads are near, the symbol is snapped
onto the nearest road.
144