Dmx Control Mode; Auto Control Mode - Bargeheights LED 36 User Manual

DMX Control Mode

To change the DMX starting address:
• Press <MENU> until the DMX channel (
played.
• Press <+> or <-> to select your starting address. (
• Press <ENTER> to assign your selection.
To put the fixture into DMX Control Mode:
• Press <MENU> until the control mode is displayed.
( or or )
dnCo Auto SCAE
• Press <+> or <-> to select DMX Control Mode. (
• Press <ENTER> to assign your selection.
DMX Channel Assignments
Channel Channel Value
1 0-255
2 0-255
3 0-255
4 0-255
0
5
1-255
0-24
25-45
46-66
67-87
88-108
109-129
6
130-150
151-171
172-192
193-213
214-234
235-255
Page 10
) is dis-
A001-A512
)
1-512
)
dnCo
Function
Overall RGB Intensity
Red Intensity
Green Intensity
Blue Intensity
No Strobe
Strobe slow -> fast
White
Blue
Green
Red
Cyan
Magenta
Yellow
Color Strobe
Color Change
Color Slow Fade
Audio Strobe
Audio Color Change
LED 36 User Manual rev. B

Auto Control Mode

The LED 36 has an automatic control mode that does not re-
quire a DMX control signal.
• Press <MENU> until the control mode is displayed.
(
or or )
dnCo Auto SCAE
• Press <+> or <-> to select Auto Control Mode. (
• Press <ENTER> to assign your selection.
Auto Control Mode has two selectable controls - color and
speed. The color mode has 14 individual choices:
– Red
CL01
– Orange
CL02
– Yellow
CL03
– Green
CL04
– Cyan
CL05
– Blue
CL06
– Magenta
CL07
– Purple
CL08
– White
CL09
– Audio Color Change
CL10
– Audio Strobe
CL11
– Slow Color Fade
CL12
– Color Chase
CL13
– Strobe
CL14
In Color Chase and Strobe modes, there are 16 speeds, from
fast to slow. is fast –
SP01 SP16
©2011 Bargeheights, Inc.
)
Auto
is slow.
Page 11