1. Manuals
  2. Brands
  3. Bargeheights Manuals
  4. Lighting Equipment
  5. LED 36
  6. User manual

Bargeheights LED 36 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
LED 36
RGB Wash Luminaire

Advertisement

Table of Contents
loading

Related Manuals for Bargeheights LED 36

Summary of Contents for Bargeheights LED 36

  • Page 1 User Manual LED 36 RGB Wash Luminaire...

  • Page 2: Table Of Contents

    1. THEBEGINNING TABLEOFCONTENTS 1. The Beginning Thanks! Unpacking Thank you for choosing the Bargeheights LED 36! This versatile Support PAR-style LED wash luminaire will provide reliable performance Introduction day in and day out. To ensure long lasting performance, please DMX Quick Reference follow the guidelines in this manual.

  • Page 3: Introduction

    (12 Red, 12 Green, 12 Blue) • High output, low power consumption • The LED 36 is for indoor use only. Do not expose the fixture to rain, or other moisture like your bathtub. • Variable electronic strobe •...

  • Page 4: Setup

    Master/Slave Mode Data - The LED 36 also has a Master/Slave mode. In this mode you can set one fixture in the line to act as the master controller – and up to 32 other fixtures can be connected and will mirror the DMX Termination operation of the first.

  • Page 5: Operation/Configuration

    DMX Control Mode quickly think in binary, they are tricky to set properly. The LED 36 has an LED display with a simple menu system. There dnCo Auto are four control buttons below the display that allow you to Auto Control Mode navigate the control menus.

  • Page 6: Dmx Control Mode

    DMX Control Mode Auto Control Mode To change the DMX starting address: The LED 36 has an automatic control mode that does not re- quire a DMX control signal. • Press <MENU> until the DMX channel ( ) is dis- A001-A512 •...

  • Page 7: Master/Slave Mode

    25 degrees (beam) 35 degrees (field) Connect LED 36 fixtures and set them in Slave Mode and they Setup & Addressing: LED Menu display – no dip switches! will operate mirroring the first fixture. Do not set the first fix- ture in Slave Mode - only the other fixtures.

  • Page 8: Care/Maintenance

    Since there are no lamps to replace, maintenance is simple - immediately upon receipt of the items. Claims must be just keep your LED 36 clean and dry. Especially if you are in a made within seven (7) days of receipt.

Table of Contents