Table of Contents
Advertisement
DMX Control Mode
To change the DMX starting address:
• Press <MENU> until
Addr
• Press <ENTER> to display the channel number, and press
<UP> or <DOWN> to select your starting address.
(
)
A001-A512
• Press <ENTER> to assign your selection.
DMX Mode Channel List
Channel
Channel Value
0-127
1
128-249
250-255
2
0-255
3
0-255
4
0-255
Page 10
is displayed.
Function
Overall Intensity
Strobe Slow -> Fast
Full Intensity
Amber Intensity
White 1 Intensity
White 2 Intensity
LED 54AW User Manual rev. A
Standalone Control Modes
The LED 54AW has several standalone control modes that do
not require a DMX control signal.
• Press <MENU> then press <UP> or <DOWN> until
or
is displayed.
3L--
3l--
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the level of that color (Amber, White 1, or White 2)
• The LED 54AW will stay on in the selected color until the
mode is changed.
is Strobe Mode. The LED 54AW will strobe in varying
FLAS
speeds from
to
.
FL00
FL12
• Press <MENU> then press <UP> or <DOWN> until
displayed.
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the speed of strobe (
FL00
is Color Fade Mode. The LED 54AW will fade colors in
FAdE
varying speeds from
to
FA00
• Press <MENU> then press <UP> or <DOWN> until
displayed.
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the speed of strobe (
FA00
is Color Cycle Mode. The LED 54AW will switch colors in
ASC-
varying speeds from
to
AS00
• Press <MENU> then press <UP> or <DOWN> until
displayed.
• Press <ENTER> to select, and press <UP> or <DOWN> to
adjust the speed of strobe (
AS00
is Sound Control: Color Cycle Mode. The LED 54AW will
SOUA
respond by changing color to music or sounds via its onboard
microphone.
is Sound Control: Strobe Mode. The LED 54AW will re-
SOUF
spond by flashing to music or sounds via its onboard micro-
phone.
©2010 Bargeheights, Inc.
AL--
FLAS
to
).
FL12
.
FA12
FAdE
to
).
FA12
.
AS12
ASC-
to
).
AS12
Page 11
or
is
is
is
Advertisement
Table of Contents
