Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Bargeheights BAR 252
Summary of Contents for Bargeheights BAR 252
- Page 1 User Manual BAR 252 RGB Linear Wash Luminaire...
-
Page 2: Table Of Contents
1. THEBEGINNING TABLEOFCONTENTS 1. The Beginning Thanks! Unpacking Thank you for choosing the Bargeheights BAR 252! This versa- Support tile linear LED wash luminaire will provide reliable performance Introduction day in and day out. To ensure long lasting performance, please DMX Quick Reference follow the guidelines in this manual. -
Page 3: Introduction
• 3 segments individually controllable within single unit • Master/Slave modes • The BAR 252 is for indoor use only. Do not expose the fixture to rain, or • Built-in standalone modes - no controller required! other moisture. The BAR 252 cannot be used as a water ski. -
Page 4: Setup
Master/Slave Mode Data - The BAR 252 also has a Master/Slave mode. In this mode you can set one fixture in the line to act as the master controller – and up to 32 other fixtures can be connected and will mirror the DMX Termination operation of the first. -
Page 5: Operation/Configuration
They are hard to see in the dark, and since most of us don’t quickly think in binary, they are tricky to set properly. The CL01 CL01 BAR 252 has an LED display with a simple menu system. There are four control buttons below the display that allow you to CL02 Orange navigate the control menus. -
Page 6: Dmx Control Mode
<+> or <-> to select your starting address. ( 1-512 • Press <ENTER> to assign your selection. 0-255 Green Intensity Ensure your BAR 252 is in DMX Control Mode: 0-255 Blue Intensity • Press <MODE> until the Control Mode is displayed. 0-255... -
Page 7: Standalone Control Modes
• Press <MODE> until the Standalone function is displayed. • Press <ENTER> to confirm your change. – Red CL01 To set your BAR 252 in Master Mode, set it up just as you would for a Standalone Control Mode. – Orange CL02 –... -
Page 8: Technical Specifications
Since there are no lamps to replace, maintenance is simple - LEDs: 252 x 10mm (108 Red, 72 Green, 72 Blue) just keep your BAR 252 clean and dry. Especially if you are in a Voltage: 100-240v / 50-60Hz dusty or haze-filled environment, there are some simple steps 3.25in (h) x 2.5in (w) x 42in (l) -
Page 9: Shipping Damage
Claims must be made within seven (7) days of receipt. Contact Us bargeheights inc www.bargeheights.com Support: www.bargeheightslighting.com/support support@bargeheights.com 859-317-2878 Page 16 BAR 252 User Manual rev. A...