Master/Slave Mode
Up to 32 LED 36s may be connected via the 3-pin DMX connec-
tions and controlled simultaneously without a DMX controller by
using Master/Slave Mode. In this mode you can set one fixture
in the line to act as the master controller – and up to 32 other
fixtures can be connected and will mirror the operation of the
Master.
• Press <MENU> until the control mode is displayed.
(
or
or
)
dnCo
Auto
SCAE
• Press <+> or <-> to select Slave Mode. (
• Press <ENTER> to assign your selection.
Connect LED 36 fixtures and set them in Slave Mode and they
will operate mirroring the first fixture. Do not set the first fix-
ture in Slave Mode - only the other fixtures.
Page 12
)
SCAE
LED 36 User Manual rev. B
Technical Specifications:
Model:
LED 36
LEDs:
36 x 1watt (12 Red, 12 Green, 12 Blue)
Voltage:
100-250v / 50-60Hz
9in (h) x 9in (w) x 12in (l)
Dimensions:
230mm (h) x 230mm (w) x 310mm (l)
Weight:
11lbs (5.0Kg)
Power
60 watts
Consumption:
DMX Channels:
6 channels
Beam Spread:
25 degrees (beam)
Setup & Addressing: LED Menu display – no dip switches!
Photometric Data:
Throw Distance
Beam Diameter
Illuminance (lux)
Photometric data taken with all channels at full. Due to varia-
tions in all LEDs, these values should be considered approxi-
mate. All LED sources experience a lowering of output and
some color shift over time. LED output varies with ambient
operating temperatures.
©2011 Bargeheights, Inc.
35 degrees (field)
3.0m
5.0m
7.0m
9.8'
16.4'
22.9'
1.34m
2.22m
3.14m
4.4'
7.3'
10.3'
3110
1470
646
Page 13