Connection; Specifications - Sharp MZ-1D07 Instruction Manual

( e
Connection
)
Note: Before connection, turn off the power of both the computer and the CRT display.
Connect the other end of the connecting cable (01 N connector) to the CRT connector at the rear of the
Model 3500 series unit.
Note: For details concerning the CRT connector, refer to the Model 3500 series OWNER'S MANUAL.
(Model 3500 series rear view)
(MZ-l007 rear view)
D
( e.
Specifications
Model name
Product name
CRT
I nput signals
Deflection frequency
Display time
Display area
Resolution
Input terminal
Semiconductor parts
Display characters
Power requirements
External dimensions
Weight
MZ-1D07
CRT display
12 inch,
90°
deflection, high resolution C RT
Video signal TTL level positive polarity
H-hold signal TTL level negative polarity
V-hold signal TTL level negative polarity
Horizontal 20.92kHz, Vertical 47.39Hz
Horizontal 32.5ps, Vertical 19.16ms
Approx. 220mm wide x 145mm high
Horizontal 640 dots, Vertical 400 lines (non-interlaced)
Rectangular 8 pin connector
1 IC, 10 transistors, 15 diodes
Maximum 2000 characters (80 characters x 25 lines)
Local voltage 50/60Hz, 37W
Width 324mm x Depth 356mm x Height 395mm (Max.) (I ncluding tilt stand)
7.2kg (Display unit), 2.2kg (Tilt stand)
)
Accessories
Tilt stand, 4 tilt stand mounting screws, connecting cable, 1 instruction manual
These specifications are subject to change without notice for improvements.