Safety Instructions; Electrical Connection - Candy PVK 310 Instructions For Use And Installation

Glass ceramic hobs
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION : safety instructions
Installing a domestic appliance can be a complicated operation which if not
carried out correctly, can seriously affect consumer safety.
It is for this reason that the task should be undertaken by a professionally
qualified person who will carry it out in accordance with the technical
regulations in force.
In the event that this advice is ignored and the installation is carried out by
an unqualified person, CANDY declines all responsibility for any technical
failure of the product whether or not it results in damage to goods or injury
to individuals.
INSTALLATION - ELECTRICAL CONNECTION
"The installation must conform to the standard directives."
CANDY declines all responsibility for any damage that may be caused by unsuitable or
unreasonable use.
Warning :
• Always check before any electrical operation, the supply tension shown on the
electricity meter, the adjustment of the circuit-breaker, the continuity of the
connection to earth to the installation and that the fuse is suitable.
• The electrical connection to the installation should be made via a socket with a
plug with earth, or via an omnipole cut-out switch with an opening gap of at least
3 mm.
If the appliance has a socket outlet, it must be installed so that the socket outlet
is accessible.
• The yellow/green wire of the power supply cable must be connected to the earth
of both power supply and appliance terminals.
• Candy cannot be held responsible for any accidents resulting from the use of an
appliance which is not connected to earth, or with a faulty earth connection
continuity.
• Any queries regarding the power supply cord should be referred to After Sales
Service or a qualified technician.
A power cord is not supplied with the appliance, but the hob is equipped with a terminal
block which enables you to choose the correct connection for the particular power supply.
The terminal block permits different connections :
. Monophase
. Two phases
. Two phases + Neutral
. Three phases
. 3 phases + Neutral
220-240 V~
220-240 V2~
380-415 V2N~
220-240 V3~
380-415 V3N~
- 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pvk 400Pvk 401

Table of Contents