Installation Steps; Package Contents; Optional Accessories; Recommended Tools - Axis F41 Installation Manual

Installation Guide
This Installation Guide provides instructions for installing AXIS F41 Main
Unit on your network. For other aspects of using the product, see the User
Manual available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials
necessary for the installation are in order. See page 9.
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 15.
4. Install the hardware. See page 20.
5. Access the product. See page 21.

Package Contents

• AXIS F41 Main Unit
• 2–pin power connector block
• 6–pin I/O connector block
• 5–pin RS232 connector block
• Installation and Management Software CD
• Printed materials
-
-
-

Recommended Tools

• Torx screwdriver T20 to remove the plastic cover bottom

Optional Accessories

• AXIS F8001 Surface Mount with Strain Relief
Installation Guide (this document)
Extra serial number label (2x)
AVHS Authentication key
9
AXIS F41 Main Unit