EdgeStar AP14003W Owner's Manual page 7

_nsta_ati©n in a s_idin_ sash windew
Step i:
Step 1: Cut the foam seal to the proper length and attach
it to the window sill.
Step 2_
Step 2: Attach the window slider kit to the window sill.
Adjust the length of the window slider kit according to
the width of the window. Shorten the adjustable
window kit if the width of the window is less than 26.5
inches. Open the window sash and place the window
slider kit on the window sill.
Step 3:
Step 3: Cut the foam seal to the proper length and attach
it on the top of the window slider kit. Close the window
sash securely against the window slider kit.
Foam _al
Step 4: Finally, cut the foam seal to an appropriate
length and seal the open gap between the top window
sash and outer window sash.
EdgeStar Portable Air Conditioner 4