Typical Configuration Diagrams - Bosch Allegiant Bilinx LTC 8016/90 Instruction Manual

LTC 8016/90 | Instruction Manual | Typical Configuration Diagrams
4.8.1 Connecting to DiBos Digital Video
Recorders
A user-supplied RS-232 grade data cable is required
to connect the DiBos DVR to the LTC 8016 Interface
Unit. The interface cable must either be purchased
locally, or constructed based on the pinouts in the
CONNECTOR AND CABLE PINOUTS section.
Connect one end of the RS-232 data cable to an
available COM port on the DiBos, and the other end
of the cable to the PC port on the Interface Unit. The
DiBos software must now be configured to send the
biphase PTZ commands out the COM port. For
details on this configuration option, refer to the
appropriate section in the DiBos instruction manual.
4.8.2 Connecting to DESA and DESA-8 Series
Digital Video Recorders
A user-supplied RS-232 grade data cable is required
to connect the DESA DVR to the LTC 8016 Interface
Unit. The interface cable must either be purchased
locally, or constructed based on the pinouts in the
CONNECTOR AND CABLE PINOUTS section.
5 TYPICAL CONFIGURATION
DIAGRAMS
Figure 12 Typical Interface Unit Connected to DVR Control Unit
Bosch Security Systems | 19 May 2004
Bilinx-enabled
AutoDomes
16-Channel
BOSCH
LTC 8016/90
Allegiant Bilinx
Interface Unit
1m LTC 8508/01
16-Channel Ribbon-
to-BNC Cable
(sold separately)
Connect one end of the RS-232 data cable to the
COM2 port on the DESA, and the other end of the
cable to the PC port on the Interface Unit. The
DESA software must now be configured to send the
biphase PTZ commands out of its COM2 port (rather
than the default COM1 port). For details on this
configuration option, refer to the appropriate section
in the DESA instruction manual.
4.8.3 Connecting to DESA
Video Recorders
A user-supplied RS-232 grade data cable is required to
XL
connect the DESA DVR to the LTC 8016 Interface
Unit. The interface cable must either be purchased
locally, or constructed based on the pinouts in the
CONNECTOR AND CABLE PINOUTS section.
Connect one end of the RS-232 data cable to the end
of the Watchdog/PTZ cable connected to the DESA's
COM1 port, and the other end of the cable to the PC
port on the Interface Unit.
Video + Data
Bilinx-enabled
Dinion Series
Cameras
Data
Video
POWER
Biphase
Divar Digital Versatile Recorder
ACK ALT
LIVE SEARCH
1 2
F1 F2
ESC
Typical DVR or Other biphase-
enabled Controller
EN | 17
XL
Series Digital
Control
Data
Video
BOSCH
Data
Video
Signals
BOSCH
3 4 5 6 7 8 9 10 11 12 13 14 15 16
A B