E-Mail Divided Transmission; Sdl - Canon DU7-1178-000 Service Manual

2.1.12 E-Mail Divided Transmission

The following takes place in response to an incoming divided mail:
The divided mail (message/partial) will be temporarily stored in 'divided data reception box' inside the
System Box; once all divisions are available, merging is initiated.
As in the case of a normal mail, the result of merging will be printed, transferred, or stored in the System
Box.
If a length of time is specified for 'divided reception time-out', and such a time passes, as many divided
mails as possible are merged and the result will be printed as soon as data is enough to make up a single
page.
If the data is not enough to make up a single page, such information as on To, From, and Subject provided
as part of the main Header will be printed.
A mail for which a time-out condition has occurred and mail units with the same ID will be removed, end-
ing the job as an error (code #848).
The mails that are stored in 'division data reception box' may be manually removed.
If a check mark is put for 'print at time of deletion', an attempt for merging will be made, and printing oc-
curs if possible. This operation will be identified by error code #99.

2.1.13 SDL

SDL(Simple Device Login)
MEAP SMS Administrator Guide abstract:
-SDL(Simple Device Login)
This is a login service that you can use alone with a machine. You can register user data in the memory
of the machine from a web browser.
The SDL login service has the following functions:
- Displays a login screen on the touch panel display of the machine, and performs user authentication.
- Displays a login page when the machine is accessed from a web browser, and performs user
authentication.
- Enables you to limit and keep track of the print/scan totals for Department ID, by linking to the
Department ID Management function of the machine.
- Enables registration and editing of user authentication data from a web browser.
F-2-6
Chapter 2
0011-9833
0011-4121
2-15