Table of Contents
Advertisement
4.2 Install a Hot-swap HDD
Install HDD Tray Frame
1. Insert an HDD tray frame into
one external drive bay as
shown.
2. Secure the frame with four
screws (two on each side).
NOTE: Align the front screws
with the holes labeled 1.
3. Follow steps 1 and 2 to install
the second HDD tray frame.
The picture on the right shows the
two installed HDD tray frames.
36
Frame Screw
Align with Hole 1
Chapter 4: Hardware Options
Advertisement
Table of Contents
