Table of Contents
Advertisement
Audience
This installation guide is intended for system integrators, and
experienced users with at least basic knowledge of configuring an
entry-level server.
Contents
This manual contains the following parts:
1. Introduction: About This Manual
This part introduces the contents of this document. It includes the
target audience, chapter description, and conventions used. It also
lists other sources of information that are not contained in this
manual.
2. Chapter 1: System Overview
This chapter describes the general features of the AP110 server.
It includes sections on front panel and rear panel specifications.
3. Chapter 2: Hardware Setup
This chapter lists the hardware setup procedures that you have to
perform when installing system components.
4. Chapter 3: Powering Up
This chapter tells how to get started with the AP110 server after
you have installed the basic components.
5. Chapter 4: Hardware Options
This chapter gives information on how to install the optional IDE
RAID kit. You will also find the procedure for removing and installing
the CD-ROM drive in this chapter.
6. Appendix A: Power Supply Information
This appendix gives information on the 250-watt switching power
supply that comes with the AP110 server.
7. Appendix B: Troubleshooting
This appendix lists the common problems that you may encounter
while using the AP110 server. It lists the possible causes of the
problems and offers solutions. You may refer to this part and try to
solve simple problems before calling customer support.
10
Introduction: About This Manual
Advertisement
Table of Contents
