Replace The Covers; Re-Install The Cover; Re-Install The Panel - Asus Pentium III IDE RAID Server AP110 User Manual

2.7 Replace the Covers

NOTE
If you are installing optional components such as the IDE
RAID kit, proceed to Chapter 4 before replacing the covers.

Re-install the Cover

1. Place the cover from the top of
the chassis, leaving about an
inch from the rear edge.
2. Slide the cover toward the rear
panel until it fits in place.

Re-install the Panel

1. Align the bottom edge of the
panel to the chassis.
2. Firmly push the panel with both
hands until it fits in place.
3. Open the panel door.
4. Secure the panel with the two
screws that you removed
earlier.
5. Lock the front panel with the
system key.
30 Chapter 2: Hardware Setup