Table of Contents
Advertisement
2. Match the metal wicker with metal protrusion on bottom left and press down
softly to fill the space between battery and pit.
3. Fold the battery cover until the wedge is hooked.
Remove:
Push SIM card out of plug from bottom.
Battery Charging
When the battery is low, it will display "Battery Low" and power off
automatically.
Notice before charging
1.
Please make sure the battery is fully charged by the first time use.
2.
Please use batteries and chargers approved by GIGABYTE.
3.
You can process battery charging no matter this device is on or off.
Prepare To Charge
1.
Open the rubber cover of charging port on bottom, and plug the travel
charger in charging port.
2.
Please make sure it is good connection between port and charging
connector, travel charger and power plug.
Charging Process
When charger is in connection, this screen will display "Charging" and the
pilot red light will turn on.
Charging complete
The pilot light will convert to green and display "Charging Complete".
Keypad Lock
You can lock the keypad to prevent from accidentally presses in standby mode.
You can still answer the call while keypad is locked.
Lock or unlock: please press [ok] and then press [call] in standby mode.
LED Light Indications
Light Signal
Red light on
Green light on
Flashing green light
Flashing red light
Flashing blue light
Description
in charging
charging complete
standby mode
missed call, incoming message
Roaming mode
9
Advertisement
Table of Contents
