Functions - Junghans Mega Futura Manual

With the time zone set correctly the appropriate transmitter frequency
gets checked as the first priority, thus reducing the length of the trans-
mitter check and power consumption.
Important note:
When you travel into a different reception area (e.g. travelling from
Germany to Japan), automatic time and transmitter synchronisation
does not take place until the watch's next attempt at picking up a time
signal. If the watch fails to pick up any transmitter signal, please check
the transmitter pre-selection (see section 5.1) or perform a manual
transmitter call (see section 5).
34

3. Functions

Your Junghans Mega Futura is operated via the Mode button and two
recessed correctors on the side of the case. To operate the correctors
please use a suitable pointed implement.
Set +
Time zone +
MODE
Toggle hour/time display
Light: press x 2
Transmitter call > 6 seconds
Set –
Time zone –
35