Settings; Setting The Time Zone; Setting The Language - Junghans Mega Futura Manual

Each number's meaning is as follows:
Pre-selection
EU DCF77, other transmitters do not get
1
taken into account in the search
EU JP US DCF77, other transmitters do get taken
2
(STANDARD) into account in the search
JP40 JJY40, other transmitters do not get taken
3
into account in the search
4 JP60 JJY60, other transmitters do not get taken
into account in the search
EU JP US JJY40, other transmitters do get taken into
5
account in the search
6 US WWVB, other transmitters do not get taken
into account in the search
EU JP US WWVB, other transmitters do get taken
7
into account in the search
8 RC OFF Receiver disabled
Confirm your entry by pressing the MODE button. If you do not press
the button, the display switches back after 9 seconds to showing the
time.
A manual transmitter call puts this setting back to number 2
(STANDARD).
40

6. Settings

6.1 Setting the time zone

Your Junghans Mega Futura can receive signals from the DCF77, JJY40,
JJY60 and WWVB time signal transmitters and in each transmitter area
reliably shows summer/winter time respectively (WWVB is an excep-
tion – see section 2.). When you are in other time zones, you can have
your watch show the current local time by adjusting the time zone set-
ting. To do this, press the SET+ button on the LC display. The currently
set time is shown flashing and the [SET] symbol remains in view for as
long as you are in Set mode. You adjust the time by pressing the SET+
and/or SET– buttons. Confirm your entry by pressing the MODE button.
If you do not press the button, the display automatically switches back
after 9 seconds to showing the time.

6.2 Setting the language

If you press the SET button briefly, [DE] for 'Deutsch' (German) gets
displayed.
By pressing the SET button again, the date display can be switched to
English. [E ] for English is now shown on the LC display.
N
To switch language, use the SET+ or SET– button. Confirm your entry by
pressing the MODE button. If you do not press the button, the display
automatically switches back after 9 seconds to showing the time.
41