Installation; Building-In Dimensions - Miele M 8261 Operating Instructions Manual

Installation

When building in the appliance,
ensure that the vent outlets at the
front of the appliance are not
hindered, and that there is adequate
ventilation to the rear of the housing
unit by leaving a large enough gap
(see diagram: 50 mm x unit width).
Do not block the ventilation gaps
with any objects.
The appliance is designed to be built
into a tall unit.
A minimum installation height of
850 mm must be maintained.
To transport the appliance, make
sure that you lift it by the appliance
housing and not by the frame. The
frame is not sturdy enough to bear
the weight of the appliance when it
is being carried.
54

Building-in dimensions

Building-in kit
The following items are supplied in the
accessory pack for installing the
appliance:
4 x 16mm
Installation
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
20
3