Brightness Control - Honda crosstour 2015 Quick Reference Manual

Brightness Control

Control Knob
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
When the parking lights are turned on and the
ignition switch is in ON *1 , you can use the
( w
brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or maximum. The
information display will return to its original
state several seconds after you adjust the
brightness.
■
Brightness level indicator
The brightness level is shown on the
information display while you are adjusting it.
I n f o r ma t i o n P r o v i d e d b y :
uuOperating the Switches Around the Steering WheeluBrightness Control
1Brightness Control
Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
Pressing the
different display.
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
exterior lights are on.
(Select/Reset) knob changes to a
125