uuIndicatorsu
Indicator
Name
Forward
Collision
Warning
(FCW)
Indicator
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
76
On/Blinking
Comes on for a few seconds
●
when you turn the ignition
switch to ON
(
w
*1
, then goes
off.
Comes on when you have
●
customized FCW to turn off.
Comes on if there is a problem
●
with the FCW system.
Blinks when the system detects
●
a likely collision with a vehicle
in front of you. The beeper
sounds.
Comes on when the FCW
●
system shuts itself off.
Explanation
Stays on constantly without FCW off - Have the vehicle
●
checked by a dealer.
Blinks while driving - Take appropriate action to prevent
●
a collision (apply the brakes, change lanes, etc.).
Stays on - The temperature inside the FCW system is too
●
high. The system activates when the temperature inside the
system cools down.
2 Automatic shutoff P. 437
Stays on - The radar sensor or the area around the camera
●
is blocked by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
Have your vehicle checked by a dealer if:
●
The indicator and message come back on after you cleaned
the area around the camera.
2 Automatic shutoff P. 437
2 Automatic shutoff P. 437
I n f o r ma t i o n P r o v i d e d b y :
Message
—
—