Honda crosstour 2015 Quick Reference Manual page 78

Indicator Name
Lane Departure
Warning (LDW)
Indicator *
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
w ( *1 , then goes off.
Comes on if there is a problem with
●
the LDW system.
Blinks when your vehicle is too close
●
to the lane lines. The beeper sounds.
Comes on when the LDW system
●
shuts itself off.
Explanation
Stays on constantly - Have the vehicle
●
checked by a dealer.
Blinks while driving - Take
●
appropriate action to keep your vehicle
within the lane lines.
Stays on - The temperature inside the
●
LDW camera is too high.
The system activates when the
temperature inside the camera cools
down.
2 LDW Camera P. 440
Stays on - The area around the camera
●
is blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator and message come back
on after you cleaned the area around
the camera.
2 LDW Camera P. 440
I n f o r ma t i o n P r o v i d e d b y :
uuIndicatorsu
Message
—
Continued 77