Honda crosstour 2015 Quick Reference Manual page 520

Cover
Wheel Nut Wrench
Spare Tire
5. Remove the cover on the cargo area lining
to access the shaft for the spare tire hoist.
6. Attach the short end of the wheel nut
wrench to the spare tire holder shaft.
Turn the wrench to the left to loosen the
shaft.
7. Attach the longer section of the wrench to
the shaft, and turn it until you can see the
spare tire.
u Do not turn the wrench any further
once you feel resistance.
8. Lift up the spare tire holder, then slide the
hook to lift down the holder.
9. Remove the spare tire from the holder.
I n f o r ma t i o n P r o v i d e d b y :
uuIf a Tire Goes FlatuChanging a Flat Tire
1Changing a Flat Tire
NOTICE
The wheel nut wrench supplied with your vehicle is
specially adapted to fit the holder shaft. Do not use
any other tool.
Continued 519