Autoselect - Dab - Sangean DAB+BOX Operating Instructions Manual

Autoselect – DAB
As an alternative to pressing the Select knob to select a station your
radio can be set so as to automatically select a station.
1. When you tune to a station that you wish to have Autoselect,
press and hold the Tuning control / Select knob until the display
shows "Auto selection ON".
2. Rotate the Tuning control until the station you required is visible on
the display. After a few seconds your radio will automatically select
the station shown on the display.
3. To switch off autoselect press and hold the Tuning control /
Select knob until the display shows "Auto selection OFF".
1-3
GB
12