Operating Your Radio - Dab - Sangean DAB+BOX Operating Instructions Manual

Operating your radio – DAB
1. Straighten the rubber antenna properly which is for both DAB and
FM reception. Press the Power On/Off button to switch on
your radio.
2. Press the Band button to select DAB band.
3. If this is the first time the radio is used, a quick scan of Band III DAB
channels will be carried out. The display will show "Clock not set...".
If the radio has been used before, the last used station will
be selected.
4. During Autotune, as new stations are detected, the station counter
on the right hand side of the display will increase and station will be
added to the list. The top line of the display shows a bar graph
indicating progress of autotune.
5. When the Autotune is completed, the first station (in numeric-alpha
order 0...9...A...Z) will be selected.
6. If the station list is still empty after the Autotune, your radio will
display "No DAB Station".
7. If no signals are found, it may be necessary to relocate your radio to
a position giving better reception.
2
GB
8