Table of Contents
Advertisement
A
NEUVIDEO
CONTENTS
INTRODUCTION & CONTENTS ....................................................1
FEATURES .................................................................................... 2
SPECIFICATIONS ........................................................................ 2
FUNCTION DESCRIPTION ..........................................................3
INSTALLATION ............................................................................. 4
DIAGRAM & CONNECTION ....................................................... 4
CABLE CONNECTION ................................................................. 5
PANEL DRAWING ....................................................................... 5
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this
manual for future reference.
INTRODUCTION
ANI-402 is an HDMI/IR/RS-232 twisted pair including transmitter
(ANI-402T) and receiver (ANI-402R). The ANI-402 uses HDBaseT™
technology to deliver HDMI signal and control signal (IR & RS-232),
over a single STP cable, max transmission distance up to 230 feet
/ 70M with CAT5e/CAT6 cable.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
• ANI-402T or ANI-402R
• Users Guide
• 100VAC ~ 240VAC, 50/60Hz power supply
TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise - without the express written permission and consent.
© Copyright 2015. All Rights Reserved.
Version 2.0 MAY 2015
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
1
Advertisement
Table of Contents
