Table of Contents
Advertisement
A
NEUVIDEO
Installation Introduction
Step 1:
Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of transmitter ANI-402T with HDMI cable.
Step 2:
Connect TP OUT port of ANI-402T and TP IN port of ANI-402R, with single CAT5e/CAT6 cable.
Step 3:
Connect HDMI display (such as HDTV) to HDMI OUT port of ANI-402R with HDMI cable.
Step 4:
Connect DC5V power adaptors to both ANI-402T and ANI-402R.
Step 5:
Both ANI-402T and ANI-402R have IR IN and OUT. When one model use for IR signal receiver, the IR signal must be sent out
by the other model.
For example: When "IR IN" of ANI-402T connects with an IR receiver, the IR sender must connect to "IR OUT" of ANI-402R.
Diagram and connection
Installation / Diagram and connection
4
Advertisement
Table of Contents
