Advertisement
A
NEUVIDEO
CONTENTS
INTRODUCTION & CONTENTS ...................................................1
FEATURES & SPECIFICATIONS ..................................................2
OPERATION CONTROLS & FUNCTIONS ..................................3
RS-232 PIN DEFINITION ..............................................................4
CONNECTION DIAGRAM ............................................................5
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this
manual for future reference.
INTRODUCTION
The ANI-304TX/RX Optical (S/PDIF) IN & OUT with RS-232
Transmitter or Receiver can send and receive S/PDIF audio
signal synchronously over a single run of CAT5e/6 cable up to
~985 ft/300M. With RS-232 control and PoE feature added this
Transmitter can pair with the Receiver unit together that support
device control and one side power supply. These products have a
3 year warranty.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
• ANI-304TX Optical IN/OUT and RS-232 Transmitter
and/or
• ANI-304RX Optical IN/OUT and RS-232 Receiver
• 12V Power Adaptor* (1) per unit
• Users Guide
* (No Power Supply Included for certain PoH Matrix combinations,
such as the ANI-1082UHD or ANI-AD100.)
APPLICATIONS
• Home sound system extension
• Conference and meeting room audio system sharing
• Showroom audio extension
• Airport announcement system
• Public sound system installation
SYSTEM REQUIREMENTS
Input Transmitter with source equipment such as Blu-ray/DVD
player and output to active speakers or sound systems. Connect
RS-232 to control device for RS-232 command receiving.
Input source equipment such as Blu-ray/DVD player and output
connect to Receiver for active speakers or sound systems. PC/
Laptop for RS-232 command sending or RS-232 control device.
TABLE OF CONTENTS
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise - without the express written permission and consent.
© Copyright 2017. All Rights Reserved.
Version 1.1 OCT 2017
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
1
Advertisement
