To Switch A Cooking Zone Off Automatically - Miele KM 5941 Operating And Installation Instructions

To switch a cooking zone off
automatically
It is only possible to programme a
cooking zone to switch off automatically
if a power setting has already been
selected for that zone. All of the
cooking zones can be programmed at
the same time.
If the time programmed is longer than
the maximum operational time
allowed, the cooking zone will switch
off after the maximum time allowed
(see relevant section).
^ Select a power setting for the zone
you require, e.g. back right, in the
usual way.
^ Touch the m sensor.
00 appears in the timer display, and the
minute minder indicator lamp will flash.
^ Touch the m sensor again.
The indicator lamp for the minute
minder in the timer display goes out,
and an indicator lamp for automatic
switch-off of a cooking zone flashes.
^ If several cooking zones are being
used, touch the m sensor repeatedly
until the indicator lamp flashes next
to the cooking zone you wish to use
this function for, e.g. back right.
The indicator lamps for the cooking
zones being used light up clockwise,
starting with the front left.
^ Touch the - or + sensor until the time
you require appears in the display,
e.g. 15 minutes.
The time then counts down in minutes.
The time remaining can be seen in the
display and changed at any time by
touching - or +.
If you want to set another cooking zone
to switch off automatically, follow the
same steps as described above.
If more than one switch-off time is
programmed, the shortest time
remaining will show in the display, and
the indicator lamp for that particular
cooking zone will flash. All the other
indicator lamps will light up constantly.
If you want to check on the remaining
time for another zone, touch the m
sensor until the indicator lamp for the
zone you require flashes.
Timer
39