To Switch A Cooking Zone Off Automatically - Miele KM 6113 Operating And Installation Instructions

Timer

To switch a cooking zone off automatically

34
You can set a time at the end of which a cooking zone will
switch off automatically.
All the cooking zones can be programmed at the same time.
If the time programmed is longer than the maximum
operational time allowed, the cooking zone will switch off
after the maximum time allowed (see "Safety switch-off").
^ Select a power level for the cooking zone you require.
^ Touch the m sensor.
00 and the minute minder indicator lamp will flash in the timer
display.
^ Touch the m sensor again.
The minute minder indicator lamp in the timer display will go
out and one of the cooking zone indicator lamps will flash.
^ If several cooking zones are switched on, touch the m
sensor repeatedly until the indicator lamp for the cooking
zone you wish to use this function for, e.g. back right,
flashes.
The indicator lamps for the cooking zones which are switched
on light up clockwise, starting with the front left.
^ Touch the - or + sensor until the time you require appears
in the display, e.g. 15 minutes.
The time set will then count down in minutes. The time
remaining will be shown in the timer display.
If you want to set another cooking zone to switch off
automatically, follow the same steps as described above.