To Switch A Cooking Zone Off Automatically - Miele KM 6322 Operating And Installation Instruction

To switch a cooking zone off automatically

You can set a time at the end of which a cooking zone will
switch off automatically.
All the cooking zones can be programmed at the same time.
If the time programmed is longer than the maximum
operational time allowed, the cooking zone will switch off
after the maximum time allowed (see "Safety switch-off").
^ Select a power level for the cooking zone you require.
^ Touch the m sensor repeatedly until the indicator light for
this cooking zone flashes.
If more than one cooking zone is switched on, the indicator
lights will flash clockwise beginning with the front left zone.
^ Set the time you want.
The time set will then count down in minutes. The time
remaining will be shown in the timer display. You can change
this at any time.
If you want to set another cooking zone to switch off
automatically, follow the same steps as described above.
If more than one switch-off time is programmed, the shortest
time remaining will show in the display, and the
corresponding indicator light will flash. All the other indicator
lights will light up constantly. If you want to check on the time
remaining for another zone, touch the m sensor repeatedly
until the indicator light for the zone you require flashes.
Timer
37