Memory Function - Miele KM 5987 Operating And Installation Instructions

Memory function

The settings used on a cooking zone
from switching on to switching off can
be saved as a memory program. Up to
five processes that you frequently use
can be saved as memory programs.
Only one program can be recorded or
used at a time.
Memory programs can be recorded for
all cooking zones.
Each cooking zone can have more than
one program recorded on it..
Saved programs are identified by a dot
after the number.
Example:
P 1 Program not saved in memory
P 1. Program saved
If all five programs are saved and you
would like to save a new process, you
must first delete a program.
Timer and Memory function
Recording a Memory program
First, select a Memory program and
then the cooking zone in the usual way.
The maximum time that can be
recorded is 99 minutes with a maximum
of 10 changes of power level.
^ Switch the cooktop on.
^ Touch the M sensor.
P 1 appears in the Timer/Memory
display.
^ Touch the + sensor until the desired
program number is displayed.
^ Touch the M sensor until a long
audible tone sounds.
^ Within 10 seconds of this, switch the
desired cooking zone on.
Recording now begins.
During recording, the indicator light for
the cooking zone being used flashes in
the Timer/Memory display and the
program memory lights up.
The process will be saved automatically
when the cooking zone is switched off
or if you touch M until a long signal
sounds. After being saved, the program
steps are displayed.
Times displayed are rounded off to the
next full minute, but when the program
is running the steps are timed to the
second.
29