Installing The Monitor - Acer AcerView 56c User Manual

Installing the Monitor

This monitor is equipped with an autosensing power supply for voltage ranges
90~264V AC, 47~63Hz.
Make sure that the system power is
turned off.
Plug the signal cable into the video signal
port of your computer and fix it with the
two screws.
Connect the power cord to the monitor
and attach it to power source.
Turn on the computer and the monitor.
F
If you connect the monitor to an Apple Macintosh through a D-Sub
cable, you need to buy a Macintosh adapter to connect the video signal
port of your computer and the monitor signal cable.
3 Getting Started
2-