Installing The Monitor - Acer View 76c User Manual

Installing the Monitor

This monitor is equipped with an autosensing power supply for voltage ranges
90~264V AC, 47~63Hz.
Make sure that the system
power is turned off.
Plug the signal cable into the
video signal
computer and fix it with the two
screws.
Connect the power cord to the
monitor and attach it to power
source.
Turn on the computer and the
monitor.
Note: If you connect the monitor to an Apple Macintosh through a D-Sub cable, you
need to buy a Macintosh adapter to connect the video signal port of your
computer and the monitor signal cable.
port of your
2 Getting Started
2-