Chapter 2 Installing The Monitor - Acer P211 User Manual

Chapter 2
This monitor is equipped with an autosensing universal compatible power supply for
voltage ranges 100-120/200-240V AC, 50~60Hz.. Please confirm the line voltage
designation at the rear panel of the monitor before connecting the machine.
1)
Make sure that the system power is turned off.
2)
Please refer to the instructions below to connect the signal cable through D-SUB or
BNC.
3)
Connect the power cord to the monitor and attach it to power source.
4)
Turn on the computer and the monitor.
4
Chapter 2
Installing the Monitor