Specifications; General Power Tool Safety Warnings - Makita 2107F Instruction Manual

ENGLISH (Original instructions)
1. Lock button
2. Switch trigger
3. Speed adjusting dial
4. Lamp switch
5. Tighten
6. Loosen
7. Protrusion
8. Lever
9. Blade

SPECIFICATIONS

Max. cutting capacity
Blade size
Overall dimensions
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
.............. DOUBLE INSULATION
Intended use
The tool is intended for cutting in wood, plastic and
ferrous materials.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Explanation of general view
10. Bearing
11. Upper holder
12. Lower holder
13. Wheel
14. Press
15. Blade guide
16. Groove
17. Screw
18. Stopper plate
Model
Round workpiece
Rectangular workpiece
Blade speed
Length
Width
Thickness
H x W x L
Net weight
Safety class
END201-7
ENE009-1
ENF002-2
GEA005-3
19. Cutting wax
20. Tire
21. Lip
22. Fluorescent tube
23. Lump box
24. Tapping screw
25. Limit mark
26. Screwdriver
27. Brush holder cap
496 mm x 184 mm x 249 mm
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
2107F
120 mm dia.
120 mm x 120 mm
1.0 - 1.7 m/s
1,140 mm
13 mm
0.5 mm
6.0 kg
/II
5