Specifications; Standard Accessories - Hitachi CD 7SA Handling Instructions Manual

PRECAUTIONS ON USING METAL CUTTING SAW
1. Do not use saw blades which are deformed or
cracked.
2. Do not use saw blades made of high speed steel.
3. Do not use saw blades which do not comply with
the characteristics specified in these instructions.
4. Do not stop the saw blades by lateral pressure
on the disc.
5. Always keep the saw blades sharp.
6. Ensure that the lower guard moves smoothly and
freely.
7. Never use the metal cutting saw with its lower
guard fixed in the open position.
8. Ensure that the retraction mechanism of the guard
system operates correctly.
9. Never operate the metal cutting saw with the saw
blade turned upward or to the side.
10. Ensure that the material is free of foreign matters
such as nails.

SPECIFICATIONS

Voltage
Max. cutting depth
Power Input*
No-Load Speed
Weight (without cord)

STANDARD ACCESSORIES

1 Carbide Tipped Saw Blade .................................... 1
2 Box Wrench .............................................................. 1
3 Guide .......................................................................... 1
4 Eye Protection ........................................................... 1
1
3
Standard accessories are subject to change without
notice.
11. For model CD7SA the saw blades should be from
180mm to 185mm.
12. For model CD7SA, be careful of brake kickback.
Model CD7SA features an electric brake that
functions when the switch is released. As there
is some kickback when the brake functions, be
sure to hold the main body securely.
13. Sparks can sometimes appear caused by braking
operation when the switch is turned off since
model CD7SA employ electric brakes. Be informed,
however, that this phenomenon is not a machine
trouble.
14. For model CD7SA, when the brake becomes
ineffective, replace the carbon brushes with new
ones.
15. Disconnect the plug from the receptacle before
carrying out any adjustment, servicing or
maintenance.
2
4
220V
63 mm
1140 W
3700 / min
4.0 kg
13