Cleaning and care
Fitting and replacing the charcoal
filters
Before fitting or replacing the
charcoal filters, the panel and the
grease filters must first be taken out
(see previous section for instructions
on how to do this).
Unwrap the charcoal filters.
Press the charcoal filters into the
frame.
Refit the grease filters.
When fitting for the first time, activate
the operating hours counter (see
"Operation").
32
When to change the NoSmell active
charcoal filters
Always replace the charcoal filters
when they no longer absorb kitchen
odours effectively.
They should, however, be replaced at
least every 6 months.
The charcoal filter operating hours
counter will light up to remind you to
change the charcoal filters regularly.
The charcoal filter operating hours
counter needs to be activated before
using for the first time (see
"Operation").
Resetting the operating hours
counter for the charcoal filters
After changing the charcoal filters, the
operating hours counter needs to be
reset.
To do this, with the fan switched on,
press the operating hours control
twice, then press it again and
hold it for approx. 3 seconds until
only the 1 is flashing. The charcoal
filter symbol will go out.
If you replace the charcoal filter before
the operating hours counter has
reached its maximum:
Press the operating hours control
twice and hold it for approx. 6
seconds until only the 1 is flashing.
Disposing of the charcoal filters
The used charcoal filters can be
disposed of with the normal
household waste.