Table of Contents
Advertisement
NoSmell active charcoal filters
If the rangehood is connected for
recirculation, two charcoal filters must
be inserted in addition to the grease
filter. These are designed to absorb
cooking odours.
The charcoal filters are fitted in the
canopy above the grease filter.
Charcoal filters are available to order via
the Miele online shop (see the end of
this booklet for contact details) or
directly from Miele. The part number of
the charcoal filters required is listed
under "Technical data".
Fitting and replacing the charcoal
filters
Before fitting or replacing the
charcoal filters, the grease filter must
first be taken out (see previous
section for instructions on how to do
this).
Unwrap the charcoal filters.
Press the charcoal filters into the
frame.
Refit the grease filter.
When fitting for the first time, activate
the operating hours counter (see
"Operation").
Cleaning and care
When to change the NoSmell active
charcoal filters
Replace the charcoal filters when
they no longer absorb kitchen odours
effectively.
They should be replaced at least
every 6 months.
The charcoal filter operating hours
counter will light up to remind you to
change the charcoal filters regularly.
The charcoal filter operating hours
counter needs to be activated before
using for the first time (see
"Operation").
Resetting the operating hours
counter for the charcoal filters
After changing the charcoal filters, the
operating hours counter needs to be
reset.
To do this, with the fan switched on,
press the operating hours control
twice, then press it again and
hold it for approx. 3 seconds until
only the 1 is flashing. The charcoal
filter symbol will go out.
If you replace the charcoal filter before
the operating hours counter has
reached its maximum:
Press the operating hours control
twice and hold it for approx. 6
seconds until only the 1 is flashing.
Disposing of the charcoal filters
Used charcoal filters can be disposed
of with the normal household waste.
29
Hide quick links:
Advertisement
Table of Contents
