Miele VENTED DRYER T 1302 Operating Instructions Manual page 17

The "Start/Stop T" button was not
pressed.
The circuit breaker tripped or the
dryer is unplugged.
The door is not closed.
Add fabric softener to laundry when washing or select the "Less Dry" setting on
the dryer.
The bulb may be bad or burned
out.
The child lock is activated.
The drum is empty.
The lint filter is clogged.
The exhaust hose or the
connection is clogged with lint.
The air supply in the room is
insufficient.
Make sure the dryer is on. Press the "Start/
Stop T" button to begin the drying program.
Make sure the dryer is plugged in or reset
the circuit breaker.
Close the door properly.
See "Changing the light bulb."
Deactivate the child lock. See "Child Lock."
Load laundry into the dryer. The dryer will not
operate when the drum is empty. Single
items should be dried with "Sturdy" or a
timed program and dry items in the "Fluff"
program.
Clean the lint filters. See "Dryer care".
Remove lint and check the exhaust system
for blockages.
Open a window or door to increase airflow.
17