Determining The Position Of The Exhaust Connection; Changing The Position Of The Exhaust Connection - Miele TOUCHTRONIC T 1303 Operating Instructions Manual

The exhaust connection can be left at
the rear of the dryer (factory standard)
or moved to the left or right side of the
dryer.
^ Remove the exhaust connection
cover on the left or right side of the
dryer.
^ Do this by inserting a screwdriver into
each raised flap and lifting upwards,
as shown.
This cover is no longer needed.
28
^ Press the supplied cover firmly into
the rear opening.
^ To remove the cap insert a
screwdriver between the machine
and the cap and lift upwards, the cap
will then pop out of place.