Husqvarna 2009 TC 250 Owner's Manual page 114

MUM2-250_310_450_510_2009_GB
- Pump with brake lever (3) or brake pedal (3A) in order to
push brake fluid out of line.
- Close the bleeding valve and fill the reservoir with fresh
brake fluid.
- Open the bleeding valve, apply the brake using the brake
lever or pedal, close the bleeding valve with the brake lever
or pedal applied and then quickly release the lever or pedal.
- Repeat this operation until the brake line is filled and clear
fluid starts coming out of the plastic hose: now close the
bleeding valve.
48
18-11-2008 11:19 Pagina 48
- Restore the brake fluid level (A) or (B) then reassemble the
rubber and the fluid reservoir cap (page 47).
After the brake fluid replacement, it is necessary to operate
the braking system bleeding (see pages 49 and 51).
3A