Husqvarna 2009 TC 250 Owner's Manual page 111

MUM2-250_310_450_510_2009_GB
WARNING!
Do not attempt to ride the motorcycle until
the brake lever or pedal are
fully effective. Pump the brake lever or ped-
al until the pads are against the discs.
The brake will not function on the first ap-
plication of the lever or pedal.
18-11-2008 11:18 Pagina 45
BRAKE DISC WEAR
Measure the thickness of each disc at the point where it has
worn the most. Replace the disc if it has worn past the service
limit.
Disc Thickness
DISC
Front
Rear
SERVICE
STANDARD
LIMIT
3 mm 2,5 mm
4 mm 3,5 mm
DISC WARPAGE
Measure disc warpage. Service limit for both discs is 0,15 mm
(0.006 in.)
Replace the disc if warpage is more than service limit.
45