Ups Setting Through The Lcd; Example Of Setting; Operation; Battery Charge - Eaton Ellipse PRO 650 Installation And User Manual

5. UPS setting through the LCD

Release scroll down button to select menu

Example of setting

LCD shut off if no activity for 3 minutes.
l

6. Operation

Battery charge

The UPS charges the battery as soon as it is connected to the AC outlet, whether button
6 is pressed or not. When used for the first time, the battery will only provide its
maximum performance after it has been charged for 8 hours. It is recommended that
the UPS be permanently connected to the AC power supply to ensure the best possible
performance.
Switching-on the UPS
Press button 6 for about 1 second.
Surge protection outlets 18 without battery backup
Equipment connected to these outlets is supplied as soon as the AC cord 4 is plugged
in. They are not affected by button 6 .
Battery backup outlets 19
Equipment connected to these outlets is supplied as soon as button 6 turns green
(see figure D).
These outlets can be turned on even if the UPS is not connected to AC power
(button 6 flashes).
8
5s 2s
Output voltage Input voltage
tolerance
(165 - 264 V)
(150 - 284 V)
10s
2s
EcoControl
5s
Save the new value
2s 2s
Alarm
5s
614-06817-00