Eaton Protection Station 650 Installation And User Manual
Hide thumbs
Also See for Protection Station 650:
- Installation and user manual (46 pages) ,
- Installation and user manual (46 pages)
Related Manuals for Eaton Protection Station 650
Summary of Contents for Eaton Protection Station 650
- Page 1 Protection Station 650/800 Installation and user manual English Français Deutsch Italiano Español Nederlands Português Polski Finnish MAU-00075 AA...
- Page 2 Packaging Protection Station Caution! Before installing the Protection Lees voordat u het Protection ◗ ◗ Station, read the booklet 3 Station gaat installeren eerst de containing the safety instructions to be veiligheidsinstructies in boekje 3 . respected. Then follow the instructions Volg daarna de instructies van deze given in this manual 4 .
-
Page 3: Quick Start
Quick start Internet / modem / fax Beep > 1 s Product representations not legally binding. MAU-00075 AB... - Page 4 ROM 6 (or downloadable from the pressed and turns green (see figure using the configuration software eaton.com site) can be configured to E). These outlets can be turned on even if the UPS is not connected to supplied with the UPS: monitor the UPS and the supply of AC power (button 11 flashes).
-
Page 5: Battery Change
The battery must be replaced ◗ exclusively by qualified personnel (risk of electrocution), with a new battery approved by Eaton to ensure correct operation of the UPS. The battery must be disposed of in ◗ accordance with applicable regulations. -
Page 6: Troubleshooting
Troubleshooting Problem Diagnostic Solution The battery backup outlets 8 Button 11 is not pressed. Press button 11 and check that it ◗ ◗ ◗ are not supplied with power. turns green. The connected devices are not The devices are not connected to Connect the devices to the battery ◗... - Page 7 MAU-00075 AB...
- Page 8 MAU-00075 AB...
- Page 9 MAU-00075 AB...
- Page 10 Technical characteristics Protection Protection Station 650 Station 800 UPS power 650 VA / 400 W 800VA / 500 W ◗ Nominal input voltage ◗ 184 V - 264 V, adjustable to 161 V - 284 V Input frequency 50/60 Hz (46 - 70 Hz working range) ◗...
Need help?
Do you have a question about the Protection Station 650 and is the answer not in the manual?
Questions and answers