Related Manuals for Makita 9533
Summary of Contents for Makita 9533
- Page 1 Angle Grinder MODEL 9533 MODEL 9533B MODEL 9533L MODEL 9534B 005751 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
• Note: Specifications may differ from country to country. END202-1 Symbols For Model 9533/9533L The following show the symbols used for the tool. Be Power supply sure that you understand their meaning before use. The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and ....Read instruction manual. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. 14. -
Page 4: Additional Safety Rules
ADDITIONAL SAFETY RULES ENB031-6 13. Hold the tool firmly. Always use eye and ear protection. Other per- sonal protective equipment such as dust mask, 14. Keep hands away from rotating parts. gloves, helmet and apron should be worn. 15. Make sure the wheel is not contacting the work- Always be sure that the tool is switched off and piece before the switch is turned on. -
Page 5: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Shaft lock 005752 CAUTION: • Never actuate the shaft lock when the spindle is moving. The tool may be damaged. - Page 6 Mount the wheel guard with the protrusion on the wheel guard band aligned with the notch on the bearing box. Then rotate the wheel guard around 180 degrees clockwise (for 9533/9533B/9533L) or counterclockwise (for 9534B). Be sure to tighten the screw securely.
-
Page 7: Operation
OPERATION WARNING: • It should never be necessary to force the tool. The weight of the tool applies adequate pressure. Forcing and excessive pressure could cause dangerous wheel breakage. • ALWAYS replace wheel if tool is dropped while grinding. • NEVER bang or hit grinding disc or wheel onto work. - Page 8 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 9 Memo...
- Page 10 Memo...
- Page 11 Memo...
- Page 12 Makita Corporation 884602A8...